FZ-2100 塑胶熔融指数测定机（塑料熔体流动速率机） MELT FLOW INDEXER 本机适用于熔融黏度较低之热塑性塑胶之品质管制。测定方法是在规定温度，荷重，及活塞于圆柱筒内位置等条件下，以计时测量方法测定熔融塑胶挤过一规定长度与直径之细孔模之速率，用来判别制程当中聚合物流率之均匀性。本机符合 ASTM，ISO，JIS，CNS 规范 A 法测定标准，可选择定时自动切料或按键切料。适用于流率在 0.15 至 50g/10 min 间之材料。 This tester covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature，load and piston position in the barrel for measuring the flow rates of polymer in producing process。This tester is complied with ASTM，ISO，JIS，CNS method A。The specimen can be cut off automatically either by a presetting specified time interval or by manually pressing the control key。It is applicable to test the material with a flow rates that fall between 0.15 and 50g / 10min。 温度控制 Temperature control 常温 ~ 400℃，PID 控制，精度 ±0.1℃（含超温保护）Room temperature ~ 400℃±0.1℃，PID control，include overheat protected 砝码 Weight 1000g，2160g，3800，5000，7160，10000g，12500g，21600g ( 任选一种 equipped with one of them ) 自动切料装置Auto cutoff device 自动切料，手动切料可选择 Auto / manual selection 设定时间 Timer 0.1 ~ 999.9min 任意设定 圆柱筒 Cylinder Ø9.5504 ± 0.0076mm 活塞 Piston Ø9.4742 ± 0.0076mm 细孔模 Die 外径 9.5 ± 0.02mm，孔径 2.0955 ± 0.0051mm，长度 8.00 ± 0.02mm Out diameter 9.5 ± 0.02mm，Inner diameter 2.0955 ± 0.0051mm， Length 8.00 ± 0.02mm 电源 Power AC 220V / 50Hz